Why It Stands Out
Key Features
- Integrated Tee Height Adjustment — three pre-drilled holes accept a rubber tee holder so you can dial in your preferred tee height without a separate stand
- Modular, Replaceable Hitting Strip — the 30"L x 12"W insert swaps out without replacing the whole mat, so a worn strip is a quick fix, not a full re-buy
- 1.75" Thick, Joint-Friendly Base — foam-backed construction absorbs impact so daily iron and driver reps don't beat up your wrists and elbows
- Commercial-Grade Turf Surface — durable synthetic turf holds up to daily strikes without matting down or losing feel over time
- Upgrade Path Built In — start with the Standard strip and move up to a Foam Divot or Gel Divot insert later without buying a new mat
- Four Sizes to Fit Any Space — 4' x 5', 5' x 8', 4' x 9', and 6' x 10' options scale from a tight garage bay to a full simulator room
- Free Continental US Shipping — included on every HotShot mat size, no freight surprises at checkout
Under the Hood
Technical Specifications
| Available Sizes | 4' x 5' ($499.95) · 5' x 8' ($764.95) · 4' x 9' ($779.95) · 6' x 10' ($1,059.95) |
| Mat Thickness | 1.75 in — consistent across all four sizes |
| Hitting Strip Insert | 30 in L x 12 in W, Standard turf, pre-installed and replaceable |
| Tee Holes | 3 pre-drilled holes, accepts a rubber tee holder for adjustable tee height |
| Weight (4' x 5' size) | ~53 lbs — larger sizes weigh proportionally more |
| Turf Type | Commercial-grade synthetic turf, Standard hitting insert included |
| Insert Upgrade Options | Standard (included), Foam Divot, or Gel Divot — sold separately |
| Base Compatibility | Works with the optional Carl's Place HotShot rubber base (sold separately) |
What's Included
In The Box
- 1x Carl's Place HotShot Golf Mat — in the size you select at checkout (4' x 5', 5' x 8', 4' x 9', or 6' x 10')
- 1x Standard HotShot Hitting Strip Insert (30"L x 12"W x 1.75"H) — pre-installed and ready to hit
- Care & setup instructions
Note: rubber base, rubber tee holder, launch monitor, projector, enclosure, and net are sold separately.
Simulation Software
Compatible Software
The HotShot mat is a hitting surface, not a data source — it works with any launch monitor and any simulator software you pair it with. If your launch monitor reads ball data on this turf, the software runs it.
GSPro
E6 Connect
TGC 2019
Awesome Golf
WGT Golf
Creative Golf 3D
Flightscope World Tour
Any LM Software
Buyer's Guide
Is This Right For You?
Home Simulator Builder
You're building or upgrading a home bay and want a mat sized to your exact space, from a tight 4' x 5' garage footprint to a full 6' x 10' room.
Great fit ✓
Daily Practice Golfer
You hit balls several times a week and want a joint-friendly 1.75" surface that won't beat up your wrists over a long season.
Great fit ✓
Budget-Conscious Buyer Who Wants Upgrade Room
You want to start with the Standard strip now and move up to a Foam or Gel Divot insert later without replacing the whole mat.
Great fit ✓
Commercial Multi-Bay Operator
Running several bays with heavy daily traffic? A commercial-duty mat rated for continuous use is a better long-term fit than a single HotShot mat per bay.
Consider alternatives
Buyer Wanting an All-In-One Kit
The rubber surround base and rubber tee holder are sold separately — if you want everything bundled in one box, factor that add-on cost in before you buy.
Consider alternatives
Before You Buy
Room Size Guide
The HotShot system comes in four footprints, so match the mat to the room you have rather than the room to the mat. As a general rule, most golfers need at least 3 m x 4.6 m (10 ft x 15 ft) of clear floor space and roughly 2.6 m (8.5 ft) of ceiling height to take a full swing with a driver without restriction — add more room on the target side if you're pairing the mat with a net or enclosure.
| 4' x 5' Mat | Best for tight garage bays and basements where floor space is the limiting factor |
| 5' x 8' Mat | Comfortable middle ground for most single-bay home simulator rooms |
| 4' x 9' Mat | Extra swing-path length for taller golfers or those who like to move around the ball |
| 6' x 10' Mat | Full-room footprint for dedicated simulator builds or shared multi-golfer spaces |
Build Your Setup
What You'll Also Need
📡
Launch Monitor
Track your shots accurately with a Garmin, TrackMan, or Uneekor device
🏠
Enclosure
Frame and screen to catch balls and display your simulator image
🎥
Projector
High-lumen short-throw projector for a clear, vivid course image
🔁
Replacement Hitting Strip
Upgrade to a Foam Divot or Gel Divot insert, or restock the Standard strip