- Seat
- 360° swivel with gas-assisted height adjustment
- Max User Weight
- 300 lb
- Motor Speed
- 3–90 rpm
- Power
- AC 110 V
Review the key specifications here, then check the full details and setup requirements below.
Product details
The HCI PowerCycle is a seated motorized exercise bike with a 3–90 rpm speed range and connected arm and leg movement. A swivel seat and adjustable riding position provide upright or more reclined setup options.
The console displays time and rpm, with forward/reverse control and a magnetic safety lanyard. The PowerCycle supports a maximum user weight of 300 lb.
Features
Specifications
- Model
- PC-500
- Motor Speed
- 3–90 rpm
- Movement Direction
- Forward and reverse
- Max User Weight
- 300 lb
- Seat
- 360° swivel with gas-assisted height adjustment
- Seat position
- Sliding base adjustment
- Session duration
- 5–60 minutes
- Power
- AC 110 V
- Display feedback
- RPM and time
- Stop control
- Magnetic safety lanyard
Delivery
Standard delivery terms vary by product and destination.
The available delivery method and any applicable shipping, special-access, remote-location, inside-delivery, installation or white-glove charge will be shown or confirmed by SimWellness before the order is released.
Check access, clearances and any utility requirements . If you are unsure, send us the details and we’ll help you check.
Warranty
Returns
Return terms vary by product.
Contact SimWellness before sending anything back so we can confirm the applicable terms and arrange the correct return process.
We’d rather help you check the practical details . If you are unsure about dimensions, access or power, send them over.
Compare HCI equipment
Compare the verified specifications and practical setup requirements for each model.
Current model
HCI PowerCycle PC-500 Motorized Exercise Bike$3,495.00
- Modes
- —
- Movement
- —
- Resistance
- —
- Power
- AC 110 V
HCI PhysioCycle XT-800 Recumbent Bike and Arm Trainer$2,495.00
- Modes
- —
- Movement
- Connected arm and leg cycling; bi-directional upper-body motion
- Resistance
- 8 magnetic levels
- Power
- —
HCI OmniTrainer OT-1100 Active and Passive TrainerFrom $6,995.00
- Modes
- Active resistance and passive motor assist
- Movement
- Upper or lower body
- Resistance
- 15
- Power
- AC 100–240 V, 50/60 Hz
HCI MotoMax MMT-950 Active and Passive Trainer$3,495.00
- Modes
- Active resistance and passive motor assist
- Movement
- Mechanically connected
- Resistance
- 15
- Power
- AC 110 V, 50/60 Hz
Want to see the rest? View the full range
A few practical things worth checking.
What is the speed range?
Motorized cycling speed is adjustable from 3 to 90 rpm.
What is the user weight limit?
The PowerCycle manual gives a maximum user weight of 300 lb.
Does the seat swivel?
Yes. The seat swivels through 360 degrees and has gas-assisted height adjustment.
Can it be set up for leg-only cycling?
The manual describes a mechanical conversion that disconnects the handlebar linkage for cycling-only use. Follow the manual’s procedure.
What electrical supply is specified?
The PowerCycle manual specifies AC 110 V and a grounded three-prong outlet.
Plan the equipment around your space.
Planning a facility or several machines?
Tell us about your room, equipment mix, access route and delivery needs. We can help you plan the project.
Plan your facility