Custom sizing is the reason I chose this. My room is not a standard dimension and every off-the-shelf kit either wasted space or would not fit. The DIY kit came together well and the instructions are clear enough to follow without prior experience.
Why It Stands Out
Key Features
- Fully custom sizing — built to your exact room dimensions, down to the inch
- 4 impact screen options: Standard, Preferred, Premium, High-Contrast Gray Premium
- Compatible with standard 1-inch EMT pipe framing (not included)
- Includes black nylon ball containment enclosure, steel corner fittings, and zip ties
- Made to order — assembled and shipped direct from Carl's Place
- Suitable for home golf simulator setups of any size
Under the Hood
Technical Specifications
| Sizing | Made to order, customizable down to the inch — standard package sizes run roughly 7.7ft x 10ft up to 9ft x 12ft screen dimensions, with wider/taller custom builds available on request |
| Frame | Built with standard 1-inch EMT conduit pipe (sourced separately at any hardware store) and steel corner fittings included in the kit |
| Impact Screen Options | Standard, Preferred, Premium, and High-Contrast Gray Premium — increasing durability and image clarity at each tier |
| Containment Netting | Black nylon ball containment enclosure around the top and sides to catch mishits |
| Rear Clearance | A minimum of roughly 8-9in behind the frame is required for the rear fittings; 12in or more is recommended for a comfortable buffer |
| Assembly | Two people, roughly a weekend — cut EMT pipe to the included spec sheet, connect with the supplied fittings, then lace in the screen |
| Fulfillment | Made to order and shipped direct from Carl's Place — allow extra lead time versus stocked items |
Overview
What's In The Box
- Carl's Place impact screen (your choice of material)
- Black nylon ball containment enclosure
- Steel corner fittings
- Zip ties for assembly
- Assembly instructions
Buyer's Guide
Is This Right For You?
An awkward or non-standard room
Because it's built to your exact dimensions, it handles low ceilings, offset garages, and irregular bays that off-the-shelf frames can't
Comfortable with basic DIY
You're happy cutting EMT pipe to spec and spending a weekend on assembly with a drill, level, and step ladder
Budget-conscious builders
You want a full custom-fit enclosure without paying for a pre-fabricated frame you don't need
Zero DIY tolerance
If you want a frame that arrives ready to bolt together with no pipe cutting, look at the Carl's Place Pro or SigPro Pro enclosure instead
Commercial multi-bay facilities
Operators running several bays typically want the faster, standardized install of the SigPro Commercial enclosure
Build Your Setup
What You'll Also Need
1-inch EMT Conduit Pipe
The frame itself is not included — pick up standard 1in EMT conduit at any hardware store and cut to the included spec sheet
Sourced separately
Golf Simulator Projector
Short-throw projector to display onto your new impact screen
View →
Launch Monitor
Tracks your ball data and feeds it to your sim software
View →
Hitting Mat & Turf
Protects your floor and simulates the tee or fairway lie
View →
Product reviews
What golfers say about Carl's Place DIY Golf Simulator Enclosure Kit — Custom Sizing, Impact Screen
Collected from manufacturer and distributor listings for this product.